Novameta LSX2-80/30/60 Wall Shelf System with Two Shelves

Two rigid stainless shelves bolt directly to the wall studs, clearing the floor so kitchen staff can slide mobile racks or prep tables underneath without obstruction. The shelves are rigidly anchored to the wall with brackets, transferring the weight directly into the building structure rather than relying on legs or a base. This arrangement keeps the area beneath the shelves clear for trolleys, bins or foot traffic, while the shelves themselves remain at a constant height for easy reach during service. Each shelf is a flat, unobstructed platform that supports trays, containers or loose items. The two-tier layout doubles the usable surface without extending the footprint, making it practical for tight kitchens where every metre of wall must earn its place. Items can be grouped by task—ingredients on the lower shelf, tools on the upper—so that workflow moves in a single vertical plane rather than across the room. To install the system, two wall brackets are first secured to the masonry or studwork at the specified spacing. The shelves are then slotted onto the brackets and locked in position. Once mounted, the shelves remain static; there are no moving parts to adjust or maintain. The operator loads each shelf up to the stated capacity, ensuring that weight is distributed evenly to prevent sagging or stress on the fixings. The construction is entirely stainless steel, including the shelves, brackets and fasteners. Stainless steel does not corrode in humid or steamy environments, resists staining from food acids and alkalis, and can be cleaned repeatedly with hot water and sanitising agents without degrading. The surface finish is smooth and non-porous, so spills do not penetrate and bacteria cannot harbour in crevices. These properties meet the hygiene standards required in professional food preparation areas. The controls are limited to the mounting hardware: screws or bolts that secure the brackets to the wall. No electrical or mechanical settings are present, so the system is ready for use once installed. A load capacity of 50 kg per shelf indicates that the system is designed for dense items such as stock pots, bulk ingredients or stacked crockery. The weight rating also determines the type of wall fixing required; heavier loads demand stronger anchors or direct attachment to structural elements rather than plasterboard or lightweight partitions. The overall dimensions of 800 mm width, 300 mm depth and 600 mm height define the space the unit occupies on the wall and the clearance needed above and below for safe loading and unloading. Cleaning is straightforward: shelves and brackets are wiped down with a damp cloth and detergent, then dried to prevent water spots. No disassembly is necessary, and the absence of joints or seams reduces areas where dirt can accumulate. Regular inspection of the wall fixings ensures continued stability under load. The LSX2-80/30/60 is one configuration within the LSX modular range. Other widths and depths are available, and the system can be manufactured to custom dimensions when standard sizes do not match the available space or workflow requirements. Project planning and installation services are offered for bespoke solutions, allowing the shelving to integrate precisely with existing equipment and room layouts.