Novameta LSX2-80/50/60 Wall Shelf System with Two Shelves

A wall-mounted storage system creates two fixed work levels above a counter or worktop, keeping tools, ingredients and small equipment within arm's reach without cluttering the surface below. The shelves are supported by two wall brackets that transfer the weight directly to the wall structure, so the load stays stable even when both shelves are fully loaded. Each shelf is a flat, rigid platform that rests on the brackets and can be removed for cleaning or reconfiguration. The open design allows air to circulate freely, preventing moisture build-up and making the surfaces easy to wipe down after service. Because the shelves are fixed to the wall, they do not shift or tilt when items are placed or removed, so there is no need for front lips or retaining edges that can trap dirt. To install the system, the two brackets are first secured to the wall at the chosen height, using fixings suitable for the wall material. The shelves are then positioned on the brackets and locked in place with the supplied fasteners. Once installed, the shelves remain in position until they are deliberately removed, so there is no daily setup or adjustment. Every surface that touches food or cleaning agents is made of the same corrosion-proof alloy, so the shelf never rusts between the seams or under the brackets where moisture collects. Stainless steel resists corrosion from moisture, steam and cleaning chemicals, so the system maintains its appearance and hygiene standards over years of use. The surfaces are smooth and non-porous, so they do not harbour bacteria and can be sanitised with standard kitchen cleaning agents. The controls are limited to the installation process: the brackets have pre-drilled holes for wall fixings, and the shelves have matching slots that align with the brackets. No moving parts or electrical connections are required, so the system is ready for use as soon as it is installed. A load capacity of 50 kg means each shelf can hold a full gastronorm tray, a stack of small containers, or several kilograms of dry goods without bending or sagging. The 800 mm length provides enough space for multiple items side by side, while the 500 mm depth keeps everything within easy reach. The 600 mm height between the floor and the lower shelf allows for a standard worktop or counter below, so the system integrates with existing kitchen layouts without requiring additional floor space. Cleaning is straightforward: the shelves can be lifted off the brackets and washed separately, while the brackets and wall fixings can be wiped down in place. Because there are no crevices or joints where food particles can accumulate, daily maintenance is quick and effective. The LSX2-80/50/60 is one configuration of the LSX modular system. Other lengths and depths are available, and the manufacturer can produce custom sizes to match specific room layouts or workflow requirements. The system is also used in food production facilities and technical rooms where hygiene and load capacity are critical. The product is listed under professional storage systems in the Novameta catalogue, alongside other modular shelving and workstation solutions for commercial kitchens.