Novameta LSX3-120/50/90 Wall Shelf System with Three Shelves

A wall-mounted storage system organises ingredients, utensils and small equipment off the worktop, keeping them visible and within reach without occupying floor space. The three shelves of the LSX3-120/50/90 system stack vertically, each supported by two wall brackets that transfer the weight directly to the wall structure. This arrangement spreads the load evenly, preventing sag and allowing each shelf to carry up to 50 kg when the brackets are fixed to a solid masonry or stud wall with suitable anchors.

The shelves themselves are flat, open trays without lips or dividers, so items can slide on and off in any direction. The 500 mm depth gives enough room for standard gastronorm trays, ingredient bins or bulk containers while still leaving clearance for hands to reach the back. A 1200 mm width spans the length of a typical workstation, providing a continuous run of storage that can be aligned with hobs, sinks or prep tables for a seamless workflow.

Installation follows a simple sequence: mark the bracket positions on the wall, drill and insert the anchors, bolt the brackets in place, then lay the shelves on top and secure them with the supplied fasteners. Once mounted, the system requires no further adjustment; the shelves sit level and stable, ready for immediate loading. Operators can fill each shelf to its 50 kg capacity, stacking heavier items on the lower levels and lighter ones above to keep the centre of gravity low and the unit steady.

The entire construction is stainless steel, including the shelves, brackets and fasteners. Stainless steel does not corrode, discolour or absorb odours, so it withstands the moisture, heat and frequent cleaning of a professional kitchen without rust or deterioration. The smooth, non-porous surface wipes clean with a cloth and standard kitchen sanitiser, meeting food-safety standards without extra maintenance.

Controls are limited to the mechanical fasteners that lock the shelves to the brackets; once tightened, they hold the shelves securely in place. The system has no moving parts, electrical components or settings to adjust, so operation is purely a matter of loading and unloading items as needed.

A 50 kg load rating per shelf means the system can store bulk ingredients, stacked crockery or small appliances without risk of collapse. The 1200 mm width provides a long, unbroken storage run that fits neatly above a standard worktop, while the 900 mm height keeps the top shelf within easy reach for most operators. The stainless steel material ensures the unit remains hygienic and durable under daily use, and the modular design allows the same system to be ordered in other lengths and depths to suit different kitchen layouts.

Cleaning involves wiping the shelves and brackets with a damp cloth and mild detergent, then drying them to prevent water spots. No disassembly is required, and the absence of crevices or joints means there are no hidden areas where dirt can accumulate.

The LSX3-120/50/90 is one configuration of the Novameta LSX modular wall shelving system. Other sizes are available, and the manufacturer offers custom fabrication to match specific room dimensions or workflow requirements, including full project planning and installation services.

The system is catalogued under professional kitchen storage and shelving solutions, where it serves as a fixed, wall-mounted alternative to mobile trolleys or under-counter cupboards.