Novameta LSX3-150/30/90 three-tier wall shelf system

A wall-mounted storage system organises ingredients, utensils and small equipment above the worktop without claiming floor space. Three shelves, each supported by two wall brackets, create separate levels so that items are grouped by use and kept within reach. The open construction allows air to circulate, preventing condensation and making surfaces easy to inspect and clean.

The shelves are fixed to the wall with brackets that transfer the weight directly to the building structure. This method keeps the unit stable under load and removes the need for legs or a base, freeing the floor beneath for trolleys or mobile equipment. Each shelf is a flat tray with a raised edge that stops items sliding off during rapid movement or vibration.

To install, the operator marks the bracket positions on the wall, drills and anchors the fixings, then slides the shelves onto the brackets. Once levelled, the shelves lock in place and are ready to load. The user places items up to the stated capacity on each shelf, working from the lowest level upwards to keep the centre of gravity low and the unit balanced.

Construction is stainless steel throughout, including the shelves, brackets and fasteners. The material resists corrosion from moisture, steam and cleaning chemicals, and does not harbour bacteria or taint stored food. Surfaces are smooth and free of crevices, so that spills wipe away without scrubbing.

The system is controlled by the physical arrangement of the shelves: the operator chooses the vertical spacing between levels to suit the items stored. No electrical or mechanical controls are fitted.

A load capacity of 50 kg per shelf means the unit can hold bulk ingredients, stacked containers or small appliances without sagging. The 1500 mm length provides a continuous run of storage along a wall, while the 300 mm depth keeps items within arm's reach without overhanging the worktop. The 900 mm overall height fits under standard overhead cupboards or extractor canopies, leaving clearance for lighting and ventilation.

Cleaning is limited to wiping the shelves and brackets with a damp cloth and mild detergent. No disassembly is required; the open design allows access to every surface. The stainless steel finish does not require painting or protective coatings, so maintenance is reduced to routine hygiene.

Variants of the LSX system are available in different lengths and depths, and custom sizes can be manufactured to match specific kitchen layouts. The same brackets and fittings are used across the range, so shelves can be added or repositioned as needs change.

The LSX3-150/30/90 is part of the Novameta professional storage range, designed for kitchens, food production and technical rooms where hygiene, durability and efficient use of space are essential.