Novameta LSX3-240/30/90 Wall Shelf System with Three Shelves

A wall-mounted storage system organises ingredients, utensils and small equipment within arm's reach while keeping worktops clear. The Novameta LSX3-240/30/90 provides three horizontal shelves fixed to the wall with sturdy brackets, creating a vertical storage column that uses the height of the room rather than its floor space. Each shelf holds up to 50 kg, so the system can support heavy containers, bulk ingredients or stacked trays without sagging or shifting under load.

The principle is simple: a rigid frame of stainless-steel brackets transfers the weight of the shelves and their contents directly to the wall structure. Because the shelves are fixed at multiple points, the load is distributed evenly, preventing localised stress that could weaken the wall or cause the brackets to pull free. The shelves themselves are flat, unobstructed panels that allow items to be slid on and off without catching, and the open design lets air circulate around stored goods, reducing condensation and maintaining hygiene.

To use the system, the operator first secures the wall brackets to a solid wall at the correct spacing. Each bracket is levelled and fixed with suitable anchors for the wall material. Once the brackets are in place, the shelves are lifted onto them and locked with the supplied fasteners. Items are then loaded onto the shelves, keeping the weight within the 50 kg limit per shelf. Because the shelves are open and unenclosed, everything remains visible and accessible, eliminating the need to move items to reach what is stored behind.

The construction is entirely stainless steel, including the shelves, brackets and fasteners. Stainless steel is chosen for its resistance to corrosion, heat and moisture, which are constant in professional kitchens. The surfaces are smooth and non-porous, so they do not trap food particles or bacteria and can be cleaned with standard kitchen sanitisers without risk of damage or discolouration. The edges of the shelves are rolled to prevent sharp corners, and the brackets are designed to avoid crevices where dirt could accumulate.

The controls are minimal: the system has no moving parts or electrical components, so there are no settings to adjust. The only requirement is that the wall fixings are appropriate for the load and the wall type, and that the shelves are loaded evenly to prevent tipping or overloading.

A load capacity of 50 kg per shelf means the system can store bulk ingredients in large containers, stacked trays of prepared food, or heavy equipment such as mixers or processors without risk of collapse. The dimensions of 2400 mm wide, 300 mm deep and 900 mm high create a tall, narrow storage column that fits against a wall without protruding far into the workspace, leaving the floor clear for movement and other equipment. The three shelves provide three separate levels, each at a convenient height for loading and unloading, so the operator does not need to bend or stretch excessively.

Cleaning is straightforward: the shelves and brackets can be wiped down with a damp cloth and a mild detergent, or sprayed with a sanitising solution. Because the surfaces are stainless steel, they will not absorb moisture or cleaning chemicals, and they will not rust or corrode over time. The open design means there are no hidden areas where dirt or moisture could collect, so the system remains hygienic with minimal effort.

The LSX3-240/30/90 is one configuration of the Novameta LSX modular wall shelving system. Other sizes are available, with different lengths, depths and numbers of shelves, and the system can be customised to match specific room layouts or workflow requirements. The manufacturer also offers full project development, including design, planning and installation, for customers who need a tailored solution.

The system is placed in the catalogue under Professional Storage Systems, Wall-Mounted Shelving.