Novameta LSX3-50/40/90 wall shelf system with three stainless steel shelves

A wall-mounted storage system organises ingredients, utensils and small equipment above the worktop without occupying floor space. The LSX3-50/40/90 unit provides three horizontal shelves fixed to the wall with two vertical brackets, creating a stable vertical column that keeps items within easy reach of kitchen staff.

The principle is simple: each shelf spans between the two brackets, distributing the weight evenly across the wall fixings. Stainless steel is chosen for its strength-to-weight ratio and resistance to corrosion, moisture and heat, which are constant in a professional kitchen. The material also withstands frequent cleaning with detergents and steam without staining or degrading, meeting food-safety regulations.

To install, the two brackets are first secured to the wall at the required height, ensuring they are level and plumb. The three shelves are then slotted onto the brackets and locked in place with the supplied fasteners. Once mounted, each shelf can hold up to 50 kg of evenly distributed load. The operator loads items directly onto the shelves, keeping heavier containers closer to the wall and lighter ones towards the front to maintain balance.

The construction consists of stainless-steel shelves and brackets, with all visible surfaces smooth and free of crevices where dirt could accumulate. The 500 mm length, 400 mm depth and 900 mm overall height create a footprint that fits above most worktops or between existing wall-mounted equipment without interfering with overhead lighting or ventilation.

The system has no moving parts or controls; it is a static storage unit. The 50 kg load rating per shelf means it can support bulk ingredients, stacked containers or small appliances without sagging or deforming over time. The 500 mm width allows standard gastronorm trays to be stored side by side, while the 400 mm depth keeps items within arm's reach without overhanging the work surface below.

Cleaning is straightforward: shelves and brackets are wiped down with a damp cloth and mild detergent, then dried to prevent water spots. The smooth stainless-steel surfaces do not trap grease or food particles, so routine cleaning maintains hygiene standards without scrubbing or disassembly.

The LSX3-50/40/90 is one configuration of the Novameta LSX modular system. Other lengths and depths are available, and the manufacturer can produce custom sizes to match specific kitchen layouts or project requirements.