Novameta Metal Catering Table with Three Sinks

A stainless steel worktable built for high-volume food preparation, pot washing and utensil rinsing combines a spacious worktop with three deep sinks in a single unit. The sinks sit side by side, allowing staff to organise tasks by stage—scraping, soaking and final rinse—without moving between stations. Each sink holds a separate water supply and waste outlet, so cross-contamination is avoided and workflow remains smooth during peak service.

The table stands on six legs, distributing weight evenly across the floor and preventing rocking on uneven surfaces. This construction also leaves the space beneath the sinks clear, so cleaning under the unit is straightforward and trapped debris is minimised.

The worktop surface is continuous and unbroken except for the sink apertures, giving a large, flat area for chopping, plating or temporary storage. Because there is no shelf below, the entire underside is accessible for mopping or pressure-washing, and air can circulate freely, reducing condensation and odours.

Overall dimensions of 2300 mm length, 600 mm width and 850 mm height create a footprint that fits standard kitchen aisles while providing enough depth for comfortable working. The height matches most professional worktops, so staff can move between stations without adjusting posture.

Cleaning follows from the materials and construction: stainless steel surfaces are wiped with sanitiser, sinks are scrubbed and rinsed, and the legs and underside are mopped or steam-cleaned to remove grease and food particles. Because there are no drawers or shelves, there are no hidden corners where dirt can accumulate.

The Novameta BHS-PLA30-240/60/85 is categorised as a preparation and washing table within the commercial kitchen equipment range.