Novameta Metal Wall Shelf Triple 2400-5 BHS-LSL3-240/50/99

A wall-mounted storage system that organises ingredients, utensils and crockery above the worktop without occupying floor space. Three shelves run the full length of the unit, each held by brackets fixed directly to the wall. The open construction allows air to circulate, keeping stored items visible and within reach while freeing cupboard space below for larger equipment. The shelves are rigid horizontal platforms that support distributed weight. Each shelf is designed to carry a uniform load across its surface; the brackets transfer that weight to the wall fixings. This method keeps the shelves level and stable, preventing sagging or tipping even when fully loaded. Because the shelves are fixed to the wall rather than resting on legs, the area beneath remains clear for trolleys, bins or foot traffic. To install, mark the fixing points on the wall, drill and insert suitable anchors. Position the brackets at the marked points, ensuring they are level. Slide each shelf onto the brackets until it locks into place. Load the shelves evenly, starting from the centre and working outward to maintain balance. Items can be added or removed at any time without disturbing the rest of the unit. The shelf's corrosion-resistant surface withstands daily scrubbing with industrial detergents and high-pressure steam without staining or pitting. The shelves and brackets are formed from sheet metal, giving a smooth, corrosion-resistant surface that withstands daily cleaning and exposure to moisture. The 2400 mm length spans the width of a typical catering worktop, providing continuous storage above hobs, sinks or prep areas. The 500 mm depth allows room for trays, containers or stacks of plates without overhanging the work surface below. The 999 mm height between shelves gives clearance for tall items such as stock pots or mixing bowls. Each shelf supports up to 40 kg when evenly loaded. This capacity suits bulk ingredients, sealed containers or stacks of crockery, but is not intended for concentrated loads such as single heavy appliances. The unit is fixed to the wall, so it does not move once installed; there are no wheels or adjustable feet. Cleaning is straightforward: wipe the shelves and brackets with a damp cloth and mild detergent. The open design prevents dirt from accumulating in corners, and the stainless steel surface resists staining. There are no moving parts to disassemble or lubricate. The catalogue places this shelf in the storage and organisation section, alongside wall racks, pan holders and under-shelf rails.