Novameta mobile worktop for dishwasher connection BHS-PRO-250/70/90

A mobile worktop bridges the gap between a commercial dishwasher and the kitchen's plating area, keeping clean crockery within arm's reach without a fixed installation. The unit rolls on castors so the operator can position it exactly where the workflow demands, then move it aside for deep cleaning or reconfiguration of the kitchen layout.

The surface is a single, seamless stainless steel plane that slopes gently towards the dishwasher's loading side. This slope ensures water drains away rather than pooling, so plates and cutlery stay dry and ready for immediate use. Because the table has no shelf underneath, the space beneath remains open, allowing the operator to slide the dishwasher rack straight from the machine onto the worktop without lifting or tilting.

To use the table, the operator wheels it into place alongside the dishwasher, locks the castors, and opens the dishwasher door. After the wash cycle finishes, the rack is pulled out and left on the sloped surface. Plates, glasses and cutlery can then be transferred directly to the plating station or stored on adjacent shelving without an extra handling step. When the service is over, the table is unlocked and rolled to a storage position or left in place for the next shift.

Construction is stainless steel throughout, chosen for its resistance to corrosion, heat and repeated cleaning with commercial detergents. The dimensions of 2500 mm length, 700 mm width and 900 mm height create a generous work surface that can hold multiple racks side by side while still fitting through standard kitchen doorways. The 2500 mm length matches the width of most commercial dishwashers, so the table aligns flush with the machine for a continuous workflow.

No shelf is fitted beneath the worktop, leaving the full height of 900 mm clear for the dishwasher rack to slide in and out without obstruction. The table is supplied as a single unit; no assembly is required beyond attaching the castors if they are delivered separately.

Cleaning is straightforward: the stainless steel surface is wiped down with a damp cloth and sanitiser after each service, and the castors are checked periodically to ensure they roll freely. Because there are no shelves, corners or crevices, the risk of trapped food debris is minimised.

The table is categorised as a mobile worktop for dishwasher connection and is listed in the Novameta professional catering equipment catalogue under tables and workstations.