Novameta Open Frame 1400-7 for Professional Catering Worktops

An open frame provides a rigid, freestanding base for catering worktops, sinks or mobile equipment stands without enclosing cupboards or drawers. Four vertical legs rise from the floor and are braced by horizontal rails, creating a stable platform that supports the weight of a work surface and the appliances or utensils placed on it. Because the frame is open on all sides, air circulates freely beneath the worktop, reducing heat build-up from hot equipment and making cleaning underneath straightforward. The absence of enclosed storage also means the frame can be positioned against a wall or in the centre of a kitchen without blocking access to plumbing, power points or floor gullies.

To assemble the Novameta Open Frame 1400-7, position the four legs on a level floor and bolt the horizontal rails between them. Adjust the leg height to match the finished worktop level required, then secure the worktop or equipment stand to the top rails. Once in place, the frame remains stationary, supporting the load without vibration or flex.

The frame is constructed from stainless steel, chosen for its resistance to corrosion in humid kitchen environments and its ability to withstand frequent cleaning with water and detergent. The four legs are individually adjustable, allowing the frame to sit level on uneven floors or to raise one side for drainage.

The controls consist of four threaded feet, one at the base of each leg, which are turned to raise or lower that corner of the frame. A locknut on each foot prevents the setting from drifting once the desired height is reached.

The 1400 mm length provides a continuous work surface wide enough for two chefs to work side by side, while the 700 mm depth keeps everything within easy reach. The adjustable height range from 835 mm to 900 mm allows the frame to match standard worktop heights or to be set slightly lower for tasks that require more downward pressure, such as rolling pastry or kneading dough. The open construction means the frame adds no extra weight to the kitchen layout beyond its own load-bearing capacity.

Cleaning is limited to wiping down the stainless steel rails and legs with a damp cloth and mild detergent. Because there are no enclosed spaces, no food debris or moisture can become trapped, and the open design allows the floor beneath to be swept or mopped without obstruction.

The Novameta Open Frame 1400-7 is listed in the catalogue under Worktop Supports and Equipment Stands.