Novameta Open Frame 400-6 for Professional Catering Worktops

An open support frame creates a stable, unenclosed base for catering worktops, shelves or mobile trolleys. The frame carries the load on four vertical legs, leaving the space beneath free for cleaning, storage or the feet of staff. Adjustable feet allow the frame to sit level on uneven floors and to match the height of adjacent equipment, so work surfaces align across the kitchen. The frame is assembled from stainless steel sections that slot together without tools. Once the legs are in place, a worktop or shelf is laid across the top rails and secured. The open construction means there are no cupboards or panels to trap dirt, and the legs can be wiped down quickly after service. To set up the frame, position the four legs at each corner. Adjust the feet until the frame is level and the top rails are at the desired height. Place the worktop or shelf on the rails and fasten it with the fixings supplied. The frame is then ready to support appliances, prep areas or storage units. The frame is made of stainless steel for corrosion resistance and easy cleaning. The four legs are height-adjustable between 835 mm and 900 mm, allowing the frame to fit under standard worktops or to match the height of other kitchen equipment. The size of 400 mm depth and 600 mm width provides a compact footprint that fits into tight kitchen layouts while still supporting a full-sized worktop. The open design keeps the floor area beneath accessible for mops and trolleys. The four-legged stainless frame lets you slide heavy stockpots or sheet pans underneath without snagging while you scrub down the worktop above. The open frame has no corners or crevices that collect debris, so maintenance is straightforward. The catalogue lists the frame under kitchen support structures and worktop bases.