Novameta Open Frame 600-6 Worktop Support

An open frame provides a rigid, freestanding base for stainless-steel worktops in professional kitchens. Without sides or cupboards, the frame allows full access from all four edges, so staff can reach every corner of the work surface without obstruction. Four vertical legs carry the load directly to the floor, distributing weight evenly across the frame's footprint. Adjustable feet on each leg compensate for uneven floors, keeping the worktop level and stable under heavy loads. The operator positions the frame where the worktop is needed, then sets each leg to the required height. Once the frame is level, the worktop is lowered onto it and secured. The open construction leaves the underside of the worktop exposed, so hoses, waste pipes or electrical cables can be routed beneath without trapping moisture or debris. Because there are no enclosed spaces, cleaning is straightforward: spills and food particles fall through to the floor, where they can be swept or mopped away. Constructed from stainless steel, the frame resists corrosion and withstands the humidity and temperature swings of a busy kitchen. The four legs are fixed to the frame at the corners, ensuring stability without additional bracing. The height adjusts between 835 mm and 900 mm, allowing the frame to match standard worktop heights or to fit beneath existing shelving or wall-mounted equipment. The frame's 600 mm by 600 mm footprint provides a compact base for a single worktop section, making it suitable for tight spaces or for creating modular workstations alongside other frames. The open design also allows air to circulate freely, reducing the risk of condensation and extending the life of both the frame and the worktop it supports. Cleaning involves wiping down the stainless-steel surfaces with a damp cloth and mild detergent, then drying to prevent water spots. Adjustable feet let the frame sit flush under uneven kitchen floors without rocking or stressing the worktop. This frame is designed to support 600 mm-wide catering worktops and is compatible with standard stainless-steel worktop panels of the same dimensions. It is listed in the Novameta catalogue under worktop support systems.