Novameta Open Frame 800-6 Worktop Support

An open-frame support provides a stable, unenclosed base on which heavy catering equipment is mounted. Instead of a cabinet or cupboard, the frame uses four vertical legs to carry the load directly to the floor. This arrangement leaves the space beneath the worktop free for cleaning, ventilation and the routing of gas, water or electrical services without obstruction. The open design also allows the unit to be positioned over existing floor gullies or drainage points, making it suitable for wet areas such as pot-wash stations or prep sinks. The operator places the frame on a level floor and adjusts the feet to bring the top surface to the required working height. Once level, the chosen appliance—grill, bain-marie, fryer or hot-hold cabinet—is bolted or clamped to the frame. The four legs spread the weight evenly, preventing tipping and reducing vibration from moving parts such as motors or compressors. Construction is four tubular legs, each fitted with an adjustable foot. The top surface is a flat, rigid platform sized to match standard catering equipment footprints. Height can be set between 835 mm and 900 mm, allowing the frame to suit different operators and tasks. The footprint of 800 mm by 600 mm provides a compact base that fits within typical kitchen layouts while still supporting substantial loads. No controls are present; the frame is a passive support. The adjustable feet are the only moving parts, used to level the unit before equipment is mounted. The 800 mm by 600 mm footprint indicates the floor space the frame occupies, leaving adjacent aisles clear for staff movement. The adjustable height range of 835–900 mm places the worktop at a comfortable level for standing tasks, reducing strain during long service periods. The absence of side panels or doors simplifies cleaning: the area beneath the frame can be swept or mopped without removing panels or reaching into enclosed spaces. Cleaning involves wiping the legs and top surface with a damp cloth to remove grease or spills. With the legs locked at the exact height your benchtop requires, the frame stays rigid under repeated knife cuts and pot slides without wobbling. The frame is supplied as a single unit, with no variants or accessories listed.