Novameta single wall shelf 1200 mm LSL1-120-30-33

A single wall shelf provides a fixed ledge above the worktop, keeping ingredients, utensils or plated dishes within arm's reach without occupying counter space. The shelf is mounted directly to the wall with brackets, transferring the weight to the building structure rather than the work surface below.

The shelf surface is flat and unobstructed, allowing items to be slid on and off without tilting or catching. Because it is open on three sides, air circulates freely, reducing condensation and keeping stored items visible and accessible from the front and both ends.

To use the shelf, first secure the mounting brackets to the wall at the desired height, ensuring they are level and properly anchored into wall studs or masonry. The shelf panel is then placed onto the brackets and fastened in position. Once installed, items can be loaded up to the stated capacity, distributed evenly across the surface to prevent overloading any single point.

The shelf is constructed from stainless steel, chosen for its resistance to corrosion, ease of cleaning and durability under frequent contact with moisture and cleaning agents. The edges are rolled to eliminate sharp corners, reducing the risk of injury and protecting stored items from damage.

The only control is the mounting hardware, which must be selected to match the wall type and the load rating of the shelf. No electrical or mechanical adjustments are required.

The 1200 mm length provides a continuous span suitable for lining up multiple containers, trays or plated dishes in a single row. The 300 mm width keeps items within easy reach without overhanging the worktop below, while the 333 mm depth allows for deeper storage of larger items or stacked containers. The 40 kg load rating indicates the maximum distributed weight the shelf can support without risk of bending or detachment from the wall.

Cleaning involves wiping the shelf surface with a damp cloth and mild detergent to remove spills and residues. Because the shelf is open and unenclosed, no hidden areas trap dirt or moisture, simplifying maintenance. The stainless steel finish resists staining and does not require polishing or protective coatings.

This model is a single shelf unit; no additional tiers or accessories are included. It is designed for general use in professional kitchens and is not specific to any particular make of equipment.