Novameta single wall shelf 1900 mm for professional kitchens

A single wall shelf fixed directly to vertical supports provides a continuous ledge for plates, trays, containers or packaged goods without occupying floor space. The shelf is mounted at a convenient working height, leaving the area underneath free for trolleys, bins or foot traffic.

The shelf is a rigid horizontal platform bolted to wall brackets or uprights. Its depth and length create a stable surface that resists sagging under distributed loads. Because the shelf is open on all sides, air circulates freely around stored items, reducing condensation and allowing quick visual checks of stock levels.

To install, mark the desired height on the wall, fix the brackets or uprights with suitable fasteners, then slide the shelf into position and secure it with screws or locking pins. Once mounted, the shelf is ready to receive items up to its stated load limit.

The shelf is constructed from stainless steel, which resists corrosion from moisture, steam and cleaning chemicals. The material is non-porous, so it does not absorb odours or harbour bacteria, and it can be wiped down with a damp cloth or sanitising solution.

The shelf measures 1900 mm long, 400 mm deep and 333 mm high. Its length provides ample linear storage for standard gastronorm trays or multiple smaller containers. The 400 mm depth accommodates most professional kitchen containers without overhang, while the 333 mm height allows comfortable reach for staff of average stature.

The shelf is rated to support a distributed load of 40 kg. This capacity allows it to hold multiple filled containers, stacked plates or packaged goods without risk of deformation or detachment from the wall.

Cleaning involves removing all items, wiping the surface with a damp cloth and mild detergent, then drying it to prevent water spots. No disassembly is required, and the shelf can be returned to use immediately after cleaning.