Novameta single wall shelf 600-5 LSL1-60-50-33

A wall-mounted shelf unit provides stable, accessible storage above the worktop without occupying floor space. The shelf is fixed directly to the wall at a convenient height, keeping ingredients, utensils or small appliances within reach while freeing the work surface below for food preparation.

The shelf is a single flat platform supported by brackets that transfer the load to the wall. This construction spreads the weight evenly across the fixing points, allowing the shelf to carry heavier items than a cantilevered design could. The flat surface prevents items from rolling or sliding off during use.

To install, mark the fixing points on the wall, drill and insert suitable anchors, then bolt the brackets into place. Once the brackets are secure, the shelf panel is placed on top and fastened with screws. The operator can then load the shelf with equipment or supplies up to the stated capacity.

The shelf is made of stainless steel, which resists corrosion from moisture, steam and cleaning chemicals. The material is easy to wipe down and does not absorb odours or stains, making it suitable for food-contact areas.

The shelf measures 600 mm in width, 500 mm in depth and 330 mm in height. The 600 mm width matches standard worktop modules, allowing the shelf to align with adjacent units. The 500 mm depth provides ample storage space without projecting too far from the wall, while the 330 mm height allows clearance for taller items stored below.

The shelf is rated to support a load of 40 kg. This capacity allows it to hold bulk ingredients, small appliances or stacks of crockery without risk of deformation or detachment from the wall.

Cleaning involves wiping the shelf and brackets with a damp cloth and mild detergent. Stainless steel does not require protective coatings or special treatments, and the smooth surface prevents dirt from accumulating in crevices.

The Novameta single wall shelf is listed in the catalogue under wall-mounted storage and shelving systems.