Novameta single wall shelf LSL1-250-50-33

A single wall shelf creates a sturdy, open work surface that keeps ingredients, utensils and small appliances within arm's reach without taking up floor space. The shelf is fixed directly to the wall with brackets, transferring the weight of stored items straight into the building structure rather than through legs or a frame. This arrangement leaves the floor beneath clear for cleaning and allows the shelf to be positioned at the exact height needed for the task, whether it is plating, garnishing or holding a bain-marie above a worktop.

The shelf itself is a flat, rigid panel that spans the full length without sagging. A lip along the front edge prevents items from sliding off when the shelf is loaded or bumped. Because the shelf is mounted to the wall, airflow circulates freely underneath, reducing the risk of trapped moisture and making the surface easier to wipe down after service.

To install, the operator marks the wall at the desired height, drills pilot holes, and secures the brackets with screws or bolts rated for the expected load. The shelf panel then slides onto the brackets and is locked in place with retaining clips. Once fixed, the shelf is ready to receive up to 40 kg of evenly distributed weight, allowing it to hold stacks of plates, containers of prepped ingredients or a row of small countertop appliances.

Constructed from stainless steel, the shelf resists corrosion from steam, splashes and cleaning chemicals. The 2500 mm length spans the width of a standard workstation, while the 500 mm depth provides ample space for multiple items side by side. The 330 mm height of the front lip gives enough clearance for fingers to reach underneath when lifting items, yet is low enough to keep small items visible and accessible.

Cleaning is straightforward: the shelf is wiped with a damp cloth and mild detergent after each service, and the underside is reached by sliding a cloth between the shelf and the wall. Because there are no legs or cross-braces, there are no corners where dirt can collect, and the open design allows the wall behind to be cleaned without removing the shelf.

The Novameta LSL1-250-50-33 is a single-tier shelf; matching double-tier and corner units are available for extended storage needs.