Novameta stainless steel catering table with three sinks, 2100 mm

A stainless steel catering table with three integrated sinks provides a continuous work surface and washing station in one unit. The solid top holds ingredients, utensils and prep containers while the sinks below allow immediate rinsing, soaking or disposal of waste without moving across the kitchen. This arrangement keeps the workflow organised and reduces cross-contamination between raw and ready-to-eat areas.

The table stands on six legs that distribute the weight evenly across the floor. Each leg is adjustable so the worktop can be levelled on uneven surfaces, ensuring water drains correctly from the sinks and the table remains stable during use.

To operate, the user loads the worktop with the day's mise en place, fills the sinks with water as needed, and connects a standard commercial tap to the pre-drilled holes in the rear rim. The sinks are used in sequence: one for initial rinsing, one for detergent washing, and one for final rinse or sanitising. After service the sinks are emptied, scrubbed and left to dry, while the worktop is wiped down with a sanitiser.

The entire unit is constructed from stainless steel, chosen for its resistance to corrosion, heat and repeated cleaning with commercial detergents. The material does not absorb odours or harbour bacteria, making it suitable for high-turnover kitchens.

The table measures 2100 mm in length, 600 mm in width and 850 mm in height. These dimensions create a worktop area large enough to hold multiple prep stations side by side, while the 850 mm height matches standard commercial work surfaces, allowing seamless integration with adjacent hobs, ovens and refrigeration units.

Cleaning follows from the materials and construction: the stainless steel surfaces are scrubbed with a non-abrasive pad and a food-safe detergent, rinsed and dried to prevent water spots. The adjustable legs are wiped down and checked periodically to ensure they remain level and secure.

The catalogue places this model in the stainless steel worktop and sink section, under fixed preparation tables.