Novameta stainless steel equipment shelf LSI3-120-30-99 with three shelves

A stainless steel equipment shelf built to hold heavy catering appliances and kitchen tools securely against a wall. The unit uses two wall brackets to transfer the weight directly into the structure, keeping the shelves level and stable under load.

The principle is simple: a rigid frame of vertical supports and horizontal cross-members carries the shelves. Each shelf is a flat, solid panel that spreads the weight evenly across the frame. Because the brackets are fixed to the wall, the shelf does not need legs or a base on the floor, freeing up floor space and making cleaning underneath easier. The design also prevents tipping, even when the shelves are fully loaded on one side.

To install the shelf, the two wall brackets are first secured to a solid wall at the correct spacing. The vertical supports are then attached to the brackets, and the three shelves are slotted into place at the desired heights. Once assembled, the shelf is ready to receive equipment: ovens, mixers, storage bins or any other professional appliance that needs a permanent, stable location off the floor.

The construction is entirely in stainless steel, chosen for its resistance to moisture, corrosion and daily wear. The material does not rust, does not absorb odours and can be cleaned with standard kitchen sanitisers without damage. The surface is smooth and seamless, with no crevices where dirt or bacteria can collect, meeting the hygiene standards of commercial kitchens and food production areas.

The controls are minimal: the shelf has no moving parts or electrical components. The only setting is the height at which each shelf is positioned during assembly, allowing the operator to organise the space according to the size of the equipment being stored.

A load capacity of 50 kg means the shelf can support the weight of most professional countertop appliances without bending or sagging. The footprint of 1200 mm wide by 300 mm deep fits against a standard kitchen wall, leaving enough room for circulation behind. The height of 999 mm allows the top shelf to be reached comfortably by an average adult without a step, while still providing three usable levels.

Cleaning is straightforward: the shelves and frame can be wiped down with a damp cloth and a mild detergent. Because there are no hidden corners or moving parts, there is no need for disassembly or special tools. The stainless steel surface dries quickly and does not stain, so the shelf can be returned to service immediately after cleaning.

Other sizes are available, and the manufacturer can produce custom units to match specific room dimensions or technical requirements. The same design is used across the range, so the operating principle, materials and cleaning method remain consistent regardless of size.