Novameta stainless steel wall shelf for catering equipment LSI1-110/50/33

A wall-mounted shelf creates a secure platform above the worktop without occupying floor space. The shelf is fixed to the wall with brackets, transferring the weight of equipment directly to the building structure. This method eliminates the risk of tipping and allows the shelf to support heavier loads than a freestanding unit of the same size. Stainless steel is chosen for its resistance to moisture, cleaning chemicals and daily wear, ensuring the shelf remains hygienic and stable in a professional kitchen environment. The operator positions the shelf at a convenient height, attaches the two wall brackets to solid masonry or studwork, then slides the single shelf panel into place. Once secured, the shelf is ready to receive appliances, containers or ingredients up to the stated load limit. The flat surface keeps items level and accessible, reducing clutter on the worktop below. Construction consists of a single shelf panel in stainless steel, supported by two wall brackets of the same material. The shelf measures 1100 mm in length, 500 mm in width and 333 mm in height from the wall. The 50 kg load capacity applies to the entire shelf area, allowing even distribution of weight without overloading any single point. The shelf is supplied as a complete unit with all necessary fixings. No controls are fitted; the shelf is a static support structure. A 50 kg capacity means the shelf can hold typical professional appliances such as a bain-marie, a small combi oven or several stacked gastronorm containers without risk of deformation. The 1100 mm length provides space for multiple items side by side, while the 500 mm depth keeps them within easy reach. The 333 mm projection from the wall determines the clearance needed behind the shelf; it must not be obstructed by pipes, ducting or other services. The seamless stainless steel surface sheds grease and food debris the moment the damp cloth passes, so kitchen staff can restore a hygienic workspace in seconds without disassembly. The absence of seams or crevices simplifies hygiene maintenance. Wall brackets should be checked periodically for tightness to maintain load-bearing capacity. Variants in other lengths and widths are available to suit different kitchen layouts. Custom sizes can be manufactured to individual drawings and project requirements. The shelf is categorised under storage and organisation equipment for professional kitchens and food production facilities.