Novameta stainless steel wall shelf for professional equipment, 2200 x 300 x 333 mm

A wall-mounted shelf provides a secure, off-floor platform for heavy catering appliances, freeing worktop and floor space while keeping equipment within easy reach. The shelf is fixed directly to the wall with brackets, transferring the load to the building structure rather than relying on legs or a base. This arrangement eliminates wobble, reduces the risk of accidental knocks and simplifies cleaning underneath. Because the shelf is open, air circulates freely around the equipment, helping to prevent overheating and extending the life of appliances that generate heat during operation. The operator positions the appliance on the shelf, ensuring the weight is evenly distributed across the full length. Three wall brackets support the shelf, spreading the load and preventing sag. Once the equipment is in place, the shelf remains static; there are no moving parts to adjust or maintain. The flat, unobstructed surface allows the appliance to sit flush, maximising the usable area and keeping the workspace tidy. The shelf is constructed from stainless steel, chosen for its resistance to moisture, corrosion and daily wear in a commercial kitchen. The material does not absorb odours or harbour bacteria, meeting hygiene standards without additional coatings. The single shelf configuration leaves the space below clear, allowing other equipment or storage to be organised beneath. Three wall brackets secure the shelf to the wall, each contributing to the 50 kg load capacity. The shelf measures 2200 mm in length, providing ample room for multiple appliances or a single large unit. The 300 mm depth accommodates standard catering equipment without overhang, while the 333 mm height from the wall ensures clearance for taps, hoses or electrical connections at the rear of the appliance. The 50 kg load rating indicates the maximum weight the shelf can safely support when properly fixed to a solid wall. This capacity suits most professional countertop appliances, from mixers and slicers to small combi ovens. The 2200 mm length allows the shelf to span the width of a typical workstation, reducing the need for multiple separate supports. The 300 mm depth keeps appliances close to the wall, minimising the reach required to access controls or ingredients. The non-porous stainless steel surface sheds grease and food debris the moment water touches it, so kitchen staff can restore a sanitary worktop in seconds without scrubbing. The open design means there are no hidden corners or crevices where dirt can accumulate. The brackets and shelf edges are smooth, with no sharp corners or welds that could trap debris. Regular inspection of the wall fixings ensures the shelf remains securely mounted. Variants are available in different lengths and widths to match specific kitchen layouts. Custom fabrication to individual drawings is also offered, allowing the shelf to fit around obstacles or integrate with existing workstations. The shelf is categorised under storage and organisation solutions for professional kitchens and food production facilities.