Novameta stainless steel worktable with shelf 1800 × 600 mm

A stainless steel worktable with an under-shelf provides a stable, hygienic surface for food preparation, plating and assembly in a professional kitchen. The flat worktop carries chopping boards, mixers and hot pans, while the shelf below holds ingredients, utensils or small appliances within easy reach. Adjustable feet allow the table to sit level on uneven floors and can raise or lower the worktop by a few centimetres to suit different tasks or operators.

The table is built as a single welded frame of square-section stainless steel tubing. The worktop and shelf are solid stainless steel sheets, seam-welded to the frame so there are no crevices where dirt can collect. The feet are adjustable threaded studs with non-slip rubber pads that protect the floor and dampen vibration.

To use the table, the operator first levels it by turning the feet until the worktop is steady. The worktop is then loaded with equipment and ingredients, while the shelf below stores items that are used less frequently. After service, the worktop and shelf are wiped down with hot water and detergent, and the frame is cleaned with a damp cloth to remove any splashes.

The overall dimensions of 1800 mm long, 600 mm deep and 900 mm high give a generous work surface while fitting through standard kitchen doorways. The worktop height of 900 mm is standard for standing tasks, and the adjustable feet allow fine tuning for comfort or for specific processes such as rolling pastry.

The table is supplied in a single configuration: 1800 mm length, 600 mm depth, 900 mm overall height, with one shelf positioned 650 mm above the floor. The worktop thickness is standardised to accept common kitchen equipment without flexing.