Novameta stainless steel worktable with shelf 2100 mm

A stainless steel worktable with a lower shelf provides a stable, hygienic surface for food preparation, plating and assembly in a professional kitchen. The flat top acts as the main work area, while the shelf beneath stores ingredients, utensils or small appliances within arm's reach, keeping the worktop clear and organised. The table stands on four legs that support both the top and the shelf. Adjustable feet allow the operator to level the table on uneven floors and to fine-tune the working height by up to 40 mm, ensuring a comfortable posture and reducing fatigue during long shifts. To use the table, the operator loads the top with the items needed for the current task and places less frequently used items on the shelf below. The height can be set once during installation and left unchanged, or adjusted periodically if the table is moved or the workflow changes. Construction is entirely in stainless steel AISI 304, a corrosion-resistant alloy that withstands frequent washing, steam and acidic or salty foods. The material is non-porous, so it does not absorb bacteria or odours, and it can be sanitised with standard kitchen chemicals without staining or pitting. The dimensions 2100 mm long by 600 mm wide give a generous worktop area for multiple stations or large trays, while the 900 mm height suits most standing operators. The shelf sits below the worktop, leaving the full length and width of the table available for immediate tasks. Stainless steel surfaces shed grease and food debris the moment hot water and detergent hit them, so the shelf and top stay hygienic between shifts. The stainless steel surfaces can be wiped down with a damp cloth and detergent after each use, then sanitised with a food-safe disinfectant. The open frame and smooth welds prevent dirt traps, and the adjustable feet can be cleaned underneath without lifting the table. Novameta supplies the table in custom sizes and configurations when ordered through consultation with its specialists. The standard model remains the 2100 x 600 x 900 mm unit with one shelf.