Novameta stainless steel worktable with shelf BHS-PLV-1300/60/90

A stainless steel worktable with a single shelf provides a hygienic, rigid surface for food preparation, plating and assembly in professional kitchens. The flat top acts as a worktop, while the shelf below holds ingredients, utensils or small appliances, keeping them within reach without cluttering the main surface. Stainless steel resists corrosion, does not absorb moisture and withstands frequent cleaning with hot water and detergents, making it the standard material for catering environments. The table stands on legs fitted with adjustable feet. These feet allow the operator to level the worktop on uneven floors and to raise or lower the entire unit by up to 40 mm, ensuring the surface aligns with adjacent equipment or meets ergonomic requirements for standing tasks. To use the table, the operator places it in the desired position, adjusts the feet to the correct height, and loads the top with the day's mise en place, chopping boards or small appliances. The shelf below is used for storage of bowls, containers or lightweight appliances that are needed during service but do not require counter space. No power or utilities are connected; the table is purely mechanical and ready for immediate use. Construction is stainless steel AISI 304 throughout, including the top, shelf, legs and feet. The gauge of the steel gives the table its rigidity and load-bearing capacity, while the brushed finish reduces glare and hides minor scratches that occur during daily use. The only controls are the adjustable feet, which are turned by hand to raise or lower each corner of the table. No switches, timers or displays are present. A length of 1300 mm provides a continuous worktop large enough for two chefs to work side by side or for a single chef to lay out multiple trays. A width of 600 mm keeps the reach comfortable while fitting through standard kitchen doorways. A height of 900 mm matches the standard worktop height in professional kitchens, aligning with hobs, sinks and other tables. The shelf is positioned below the worktop at a height that allows standard gastronorm containers to slide in and out without obstruction. Cleaning is straightforward: the stainless steel surfaces are wiped down with a damp cloth and detergent after each service, and the adjustable feet are checked periodically to ensure they remain tight and level. The seamless welded corners and sloped shelf edges let water and debris slide off without trapping grime between panels. The table is available in custom sizes in consultation with Novameta specialists. Widths of 650 mm and 700 mm can be supplied at additional cost, and other dimensions can be manufactured to order. The product is categorised under stainless steel worktables in the Novameta professional catering equipment catalogue.