Novameta stainless-steel worktable with three sinks and an undershelf

A stainless-steel worktable built for continuous washing, rinsing and sanitising in a professional kitchen. Three deep basins sit side by side, letting staff organise separate stages without cross-contamination. The basins are set into a flat worktop that also serves as a landing area for dirty dishes and a staging point for clean ones, keeping the workflow linear and uncluttered.

The table stands on four legs and an undershelf. The legs raise the work surface to standard height, matching adjacent counters and hobs so staff can slide heavy pots and trays without lifting. The undershelf provides a stable platform for detergent bottles, brushes or small bins, keeping them within reach but off the wet worktop.

Each basin measures 400 mm square and 250 mm deep, giving enough volume for large pots and sheet pans. The stainless-steel construction resists corrosion from water and cleaning chemicals, and the smooth surfaces allow quick wipe-downs between tasks. The entire unit is 2200 mm long, 600 mm deep and 850 mm high, fitting against a wall or between other workstations without overhang.

The table requires no power or plumbing connections; it is positioned over existing floor gullies or drains. Staff fill the basins manually from a tap or hose, and empty them by lifting the waste plugs. The flat rim between basins prevents splashes from one stage reaching the next, and the raised edge around the worktop stops water running onto the floor.

Cleaning is straightforward: basins are scrubbed with a brush and detergent, rinsed and left to air-dry. The undershelf is wiped with a damp cloth, and the legs and frame are cleaned with a mild cleaner to remove grease and fingerprints. The stainless steel does not stain or rust if dried after use, and the welded seams prevent dirt collecting in corners.