Novameta stainless steel worktable with two shelves 2400 mm

A stainless steel worktable with two shelves provides a sturdy, hygienic surface for food preparation, plating and storage in professional kitchens. The flat top and lower shelves create organised work zones, keeping ingredients, utensils and equipment within reach while maintaining a clear workflow. The metal construction supports heavy loads without sagging, and the smooth surface resists corrosion and is easy to sanitise between tasks. The table stands on adjustable feet that level the unit on uneven floors and allow the operator to set the working height for comfort or to match adjacent counters. Shelves are fixed in position, offering permanent storage without moving parts that could trap debris or require maintenance. To use the table, position it where the workflow requires a preparation or assembly point. Adjust the feet until the top is level and at the desired height. Load the top with cutting boards, mixers or hot pans, and place containers, trays or ingredients on the shelves below. The open design beneath the shelves allows air to circulate, preventing heat build-up and making cleaning underneath straightforward. The table is constructed from AISI 304 stainless steel, a grade chosen for its resistance to corrosion and staining in wet or acidic environments. The metal is formed into a seamless top and two shelves, each supported by a welded frame. The feet are threaded to allow height adjustment up to 40 mm, and the base is wide enough to prevent tipping when fully loaded. No controls are fitted; the table is a static unit that requires no power or programming. The height adjustment is manual, using the threaded feet. A length of 2400 mm provides ample linear space for multiple chefs to work side by side or for large trays and sheet pans to be laid out. The 600 mm depth keeps items within easy reach without overhanging into walkways. The 900 mm overall height places the top at a standard worktop level, matching most kitchen counters and hobs. The adjustable feet allow fine-tuning to align with adjacent surfaces or to compensate for floor irregularities. After each shift the shelves hold their mirror finish when you lift off trays and wipe down with a damp microfibre cloth. The open underside and smooth welds leave no crevices where food debris can accumulate. Shelves can be removed if the table is specified with that option, but the standard model has fixed shelves that are cleaned in place. The table is available in two widths: 650 mm with a 3% tolerance at the listed price, and 700 mm with a 5% tolerance at the listed price. Height adjustment up to 40 mm is standard across all versions. Custom dimensions and designs can be ordered through consultation with Novameta specialists. The product is categorised under professional kitchen tables and worktops in the Novameta catalogue.