Novameta table to dishwasher with 3 basket guides for 1700 mm dishwashers

A stainless steel worktable built to bridge the gap between a commercial dishwasher and the worktop, keeping clean and dirty baskets organised in a straight line. Three full-length guides run the length of the table, holding dishwasher baskets securely so they slide from the washer, across the table and into position without tipping or jamming.

The principle is simple: instead of lifting baskets from the dishwasher and carrying them to a separate table, the operator slides them along the guides. This keeps the workflow linear, reduces handling and speeds up unloading. The guides also prevent baskets from being placed at an angle, which can block the dishwasher door or cause spills when the next basket is pulled out.

To use the table, the operator opens the dishwasher door, pulls the first basket onto the nearest guide, then slides it along to the far end of the table. The next basket follows, and the third guide holds a fresh basket ready to load into the dishwasher. The sequence keeps the worktop clear and the baskets in order, so plates, glasses and cutlery can be unloaded or loaded without searching for space.

Construction is stainless steel throughout, with a flat worktop that resists water and cleaning chemicals. The table stands at 900 mm, matching standard worktop height for comfortable standing work. No shelves or cupboards are fitted, so the space beneath remains open for storage or for moving trolleys close to the dishwasher.

The three guides are fixed in place and spaced to fit standard 1700 mm dishwasher baskets. No controls are present; the table is a static support designed for one task: keeping baskets aligned and easy to move.

The footprint of 1700 x 700 mm matches the width of a 1700 mm dishwasher, so the table sits flush against the machine. The length gives enough room for three baskets to be staged at once, while the 700 mm depth keeps the table narrow enough to fit in a straight run of worktop without blocking walkways.

Cleaning is straightforward: the stainless steel surface wipes down with a damp cloth and standard kitchen sanitiser. The guides can be brushed or wiped to remove food debris, and the open underside allows easy access for mopping the floor beneath.

The table is supplied as a single unit with no variants or options. It is designed to fit 1700 mm commercial dishwashers and is placed in the catalogue under dishwasher accessories and worktop organisation.