Novameta table to dishwasher with 3 basket guides for 2400 mm worktop BHS-BR3-240/70/90

A stainless steel worktable built to bridge the gap between dishwasher and worktop, keeping dirty and clean baskets organised in a single pass. Three full-length guides run the length of the table, holding standard dishwasher baskets at a fixed height and spacing so they slide straight from the machine onto the table without lifting or tilting. The guides also prevent baskets from shifting during loading, so plates and cutlery stay aligned and do not jam the dishwasher.

The table acts as a staging area: dirty baskets are placed on the guides at one end, pushed through the dishwasher, and emerge at the other end ready for unloading. Because the guides are fixed, the operator does not need to adjust height or alignment between cycles, reducing handling time and the risk of spills. The flat surface around the guides provides space for stacking plates, cutlery or trays before they are transferred to storage cupboards or service counters.

Construction is stainless steel throughout, with a single-sheet top that has a 4% fall towards the rear edge to direct any spillage away from the operator. The table stands on adjustable feet for levelling on uneven floors, ensuring the guides remain parallel to the dishwasher rails. No additional shelving or cupboards are fitted, keeping the footprint minimal and the load light enough for two people to reposition without machinery.

The 2400 mm length matches the width of most commercial dishwashers, allowing the table to sit flush against the machine without overhang. The 700 mm depth provides enough space for two baskets side by side, so one can be loaded while the other is unloaded. The 900 mm height aligns with standard worktop levels, so the table integrates seamlessly with existing kitchen lines.

Cleaning is straightforward: the smooth stainless steel surface and open underside allow quick wipe-down with a damp cloth and sanitiser. The guides can be removed for deeper cleaning if needed, though the entry does not specify how they attach. No electrical or plumbing connections are required, so the table can be moved or stored without disconnection.