Novameta Table to Dishwasher with Integrated Sink and Frame, 1000 mm

A stainless-steel worktop with an integrated sink and supporting frame, built to position directly beside a commercial dishwasher. The unit creates a continuous work surface that eliminates the need to carry racks across the kitchen floor, reducing spills and saving steps.

The principle is simple: dirty crockery and utensils are scraped and rinsed in the sink, then slid straight into the dishwasher rack without leaving the worktop. The sink holds water for pre-wash, while the surrounding deck provides space for stacking plates, cutlery and glassware before and after washing. The frame beneath supports the weight of the loaded sink and the dishwasher rack, distributing it evenly across the floor.

Use begins by filling the sink with hot water and detergent. Staff scrape and rinse items, then place them in the dishwasher rack on the adjacent deck. Once the rack is full, it is pushed directly into the dishwasher without lifting. After the wash cycle, the clean rack slides back onto the deck for unloading, keeping the workflow linear and efficient.

Construction is stainless steel throughout, chosen for hygiene and resistance to corrosion in wet environments. The worktop surface is seamless, with rounded corners to prevent debris collecting. The sink is inset into the deck, and the frame is welded for stability. No moving parts are fitted, so maintenance is limited to cleaning.

The controls present are the taps that supply the sink; these set water flow and temperature for pre-rinsing.

The size of 1000 mm by 700 mm by 900 mm determines the space the unit occupies on the kitchen floor. The 1000 mm width matches the standard frontage of most commercial dishwashers, allowing a flush connection. The 700 mm depth provides enough deck space for two racks side by side, while the 900 mm height aligns with typical worktop levels for comfortable use.

Cleaning involves wiping the stainless-steel surfaces with a damp cloth and mild detergent after each service. The sink is scrubbed to remove food residue, and the taps are descaled periodically to maintain water flow. No disassembly is required, as the unit has no internal components.

The catalogue places this product in the dishwashing section, under worktop accessories for commercial kitchens.