Novameta Table to Dishwasher with Long Rolls and Grid Shelf 800

A stainless steel worktop table designed to connect directly to a commercial dishwasher, smoothing the flow of dishes from scraping to racking. The long rolls along the top surface let plates, trays and utensils glide without lifting, while the grid shelf underneath holds racks of clean or dirty dishes at waist height, keeping the worktop clear for sorting and stacking.

The principle is simple: gravity and smooth surfaces replace manual carrying. Dirty dishes are scraped on the worktop, slid across the rolls into a rack on the shelf, then pushed into the dishwasher. Clean dishes return the same way, rolling out of the machine onto the shelf for drying or storage. The grid shelf adjusts in height to match the dishwasher's rack position, so the operator never has to bend or stretch.

To use the table, position it flush against the dishwasher's loading side. Load dirty dishes onto the worktop, scrape off food waste, then slide them along the rolls into a rack on the shelf. Once the rack is full, push it into the dishwasher. After the wash cycle, pull the rack back onto the shelf, where clean dishes can air-dry or be transferred to cupboards. The rolls reduce friction, so even heavy trays move with minimal effort.

The table is built from stainless steel, chosen for hygiene and resistance to water and detergents. The worktop is seamless, with rolled edges to prevent spills. The grid shelf is also stainless steel, with adjustable brackets that lock into pre-drilled holes on the table's legs. The legs are square tubes, welded to the frame for stability, and the feet are adjustable to level the table on uneven floors.

The 800 mm width matches standard commercial dishwashers, allowing a seamless connection. The 600 mm depth provides enough space for racks on the shelf while leaving room for scraping on the worktop. The 900 mm height aligns with most dishwasher loading doors, so racks slide in and out without tilting. The table's footprint fits into kitchen layouts where space is tight, and its weight ensures it stays in place during use.

Cleaning is straightforward: wipe the worktop and rolls with a damp cloth and detergent after each service. The grid shelf can be removed for deeper cleaning, and the legs and frame can be scrubbed with a brush to remove grease build-up. The stainless steel surface resists stains and corrosion, so the table maintains its appearance with regular upkeep.

The table is part of the Novameta range of dishwashing support equipment, designed to integrate with commercial kitchen workflows. It is placed in the catalogue under dishwasher accessories and worktop solutions.