Novameta table to dishwasher with long rolls and shelf 1900 mm

A stainless steel worktop mounted on a rigid frame, designed to bridge the gap between a commercial dishwasher and the next stage of the wash-up line. The unit carries dirty crockery and glassware on its surface, then feeds cleaned items forward on smooth-running rolls that eliminate manual lifting between stations.

The table stands on adjustable feet that level the worktop regardless of floor unevenness. A shelf beneath the worktop holds racks, chemicals or spare trays, keeping them within reach but clear of the main work flow. The entire assembly is built for continuous use in a busy kitchen, where plates and glasses move in a steady stream from the dishwasher to the storage or service area.

To use the table, staff load dirty items onto the worktop at the rear. Once the dishwasher cycle finishes, clean items slide forward on the rolls, allowing staff to unload without bending or reaching across the machine. The shelf below is accessed by lifting items from the front or side, depending on kitchen layout.

Construction is fully welded stainless steel, chosen for corrosion resistance and ease of sanitising. The frame is tubular, giving strength without excess weight. The rolls are sealed ball-bearing units that require no lubrication and resist water ingress. The shelf is a flat stainless steel panel mounted on brackets that bolt to the frame.

The 1900 mm length provides space for a standard commercial dishwasher plus a working buffer on either side, allowing two operators to work simultaneously without crowding. The 600 mm depth matches the footprint of most under-counter and pass-through dishwashers, ensuring a flush fit. The 900 mm height aligns with standard worktop levels, so plates and trays transfer at the same level as adjacent tables and trolleys.

Cleaning is limited to wiping the worktop, rolls and shelf with a damp cloth and sanitiser after each service period. The sealed bearings on the rolls prevent grease or debris from entering, so no disassembly is required. The shelf can be removed for deep cleaning if necessary, though its open position beneath the worktop means it rarely collects food waste.

The table is supplied as a single unit, ready assembled. No variants are listed for this model.