Novameta table to dishwasher with rolls and grid shelf 1200 mm

A stainless-steel worktop on four legs forms a straight run from the dishwasher to the sorting area. Long and short rolls are mounted side by side: the long roll carries large trays and sheet pans, the short roll keeps smaller items from tipping while they drain. A grid shelf beneath the rolls holds clean ware at waist height, ready for the next service.

The principle is a continuous surface at the same height as the dishwasher's exit. Dirty ware enters the machine; clean ware emerges onto the rolls, where it slides forward under its own weight. The grid shelf below keeps the worktop clear for the next load, so the operator can keep the machine running without stopping to clear space.

To use the table, the operator pulls clean ware from the dishwasher onto the long roll. Large items roll forward; smaller items are transferred to the short roll to prevent them sliding off. Once the ware is cool enough to handle, it is lifted onto the grid shelf for storage or immediate use. The sequence keeps the worktop free for the next cycle, reducing idle time between loads.

Construction is stainless steel throughout, with adjustable feet for levelling on uneven floors. The rolls are fixed in place; the grid shelf is removable for cleaning.

The size of 1200 mm wide by 600 mm deep gives a footprint that matches most commercial dishwashers, allowing a straight run without turns. The 900 mm height aligns with standard dishwasher exits, so ware slides smoothly from machine to table without lifting.

Cleaning is wiping the rolls and worktop with a damp cloth and sanitiser after each service. The grid shelf lifts out for thorough washing in a sink or under a tap. Adjustable feet should be checked periodically to keep the table level and prevent ware from rolling unevenly.

The catalogue places this unit in the dishwasher support section, for kitchens that need a straight, organised flow from machine to storage.