Novameta table to dishwasher with rolls and grid shelf 2200 mm

A stainless-steel table bridges the gap between a commercial dishwasher and the main worktop, keeping dirty and clean racks organised in one continuous flow. Instead of lifting racks from the dishwasher onto a separate surface, the operator slides them along the table's roller tracks, freeing both hands for stacking or unloading.

Rollers reduce friction so that loaded racks move with a light push, even when the table carries several at once. The grid shelf underneath provides a ventilated space for plates or trays to air-dry without blocking the main work surface. Because the shelf is open mesh, air circulates freely, speeding drying and preventing condensation from dripping onto the floor.

The operator loads dirty racks onto the long roller section at one end, pushes them through the dishwasher, then slides them out onto the shorter roller section or the grid shelf at the other end. The table's length allows several racks to queue without crowding the dishwasher or the worktop.

The frame and work surface are stainless steel, standardised for hygiene and durability in professional kitchens. The rollers are nylon, chosen for quiet operation and resistance to corrosion from water and detergents.

The table measures 2200 mm long, 600 mm wide and 900 mm high. The length matches the width of many commercial dishwashers, creating a seamless run from loading to unloading. The 600 mm depth keeps the footprint compact while still providing space for racks and the grid shelf. The 900 mm height aligns with standard worktops, allowing racks to slide directly onto adjacent counters without lifting.

Cleaning is straightforward: the stainless-steel surface wipes clean with a damp cloth, and the nylon rollers can be removed for rinsing if detergent residue builds up. The grid shelf lifts out for separate cleaning or to access the space beneath for mopping.