Novameta table to dishwasher with rolls and shelf 1100 mm

A stainless-steel worktop on legs brings dirty dishes from the wash-up area to the dishwasher and carries clean ones away without extra handling. The table stands between the sink and the machine, so plates, trays and utensils roll straight from one to the other on low-friction tracks. Roller tracks replace manual lifting and sliding. A long track runs the full length of the table, giving a continuous path for large or awkward loads. A shorter track sits beside it, keeping small items from rolling off or jamming. The rollers turn freely, so a single push moves a loaded tray the whole distance without stopping. A shelf underneath the worktop holds racks, cutlery baskets or detergent while the operator loads the machine. It keeps everything within reach and clears the worktop for dishes. The shelf is fixed, so it does not swing or shift when the table is moved. The table is 1100 mm wide, giving space for two racks side by side or a single large tray. The 600 mm depth matches standard dishwasher racks, so nothing overhangs. The 900 mm height aligns with most commercial dishwashers, keeping the roller tracks level with the machine's loading door. Stainless steel resists water, detergent and heat. The worktop has a raised rim on three sides to stop water running onto the floor. The adjustable legs ensure the cutting board stays dead-level while the sink fills behind it, preventing water from pooling at one end. Cleaning is a wipe-down of the worktop, shelf and roller tracks. The rollers can be lifted out for thorough cleaning if needed.