Novameta table to dishwasher with rolls and shelf 1200 mm BHS-MPLO-120/60/90

A stainless steel worktop table links the dishwasher to the kitchen workflow, letting plates and trays move straight from wash to storage without extra handling. The unit stands at working height, so staff slide racks directly from the dishwasher onto its surface, then roll them along the built-in rails to the next station. A shelf underneath holds clean plates or trays ready for service, keeping the worktop clear for active loads. The table's fixed rolls guide racks in a straight line, preventing jams and spills. A short roll at one end stops racks from rolling off, while a longer roll along the length lets staff push racks smoothly to the far side. The shelf beneath is flat and open, so it accepts any standard tray or plate rack without needing special fittings. Operators load the table by sliding a rack from the dishwasher onto the rolls, then push it along to the far end or lift it onto the shelf. When the shelf is full, the worktop remains free for the next wash cycle. The sequence keeps clean items moving without stacking them on the floor or on other equipment. Construction is stainless steel throughout, chosen for hygiene and resistance to moisture and detergents. The frame is welded for stability, and the worktop is seamless to prevent dirt traps. The rolls are fixed to the frame, not the worktop, so they do not interfere with wiping the surface clean. The table's footprint of 1200 mm width and 600 mm depth fits between a standard commercial dishwasher and a wall or another workstation. Its 900 mm height matches most dishwasher racks, so staff do not need to lift or tilt them. The unit is freestanding and does not require fixing to the floor or wall. The stainless-steel worktop and sealed seams let water drain straight into the dishwasher without pooling on the frame or shelf. The stainless steel worktop and shelf wipe clean with a damp cloth and detergent. The rolls can be lifted or rotated to clean underneath, and the open frame lets water run off without pooling. No moving parts need lubrication or adjustment. The model is supplied as a single unit with one shelf and two rolls, one long and one short. The fixed shelf and single roll height are sized to slide standard gastronorm trays directly from the pass-through to the dishwasher rack.