Novameta table to dishwasher with rolls and shelf 1700 mm BHS-MPLO-170/60/90

A stainless-steel worktop on four legs brings dirty crockery from the dining area straight to the dishwasher without lifting. Two roller tracks—one long, one short—let staff slide racks of plates, glasses and cutlery along the surface at waist height, cutting the number of transfers between counter and machine.

The principle is simple: gravity and low friction replace manual carrying. The rollers are set at a slight downward slope towards the dishwasher, so loaded racks move forward with a gentle push. A shelf beneath the worktop holds detergent, rinse aid or empty racks within arm's reach, keeping the workflow continuous and organised.

To use the table, staff place a loaded dishwasher rack at the far end of the long roller track. A light push sends it gliding towards the dishwasher door; the short track on the opposite side provides a parallel route for smaller loads or for returning empty racks. Once the rack reaches the end of the track, it is lifted directly into the dishwasher, eliminating the need to carry it across the kitchen.

The frame and worktop are made of stainless steel, chosen for hygiene and resistance to moisture and cleaning chemicals. The legs are adjustable to level the table on uneven floors, ensuring the rollers remain aligned and the racks move smoothly.

The dimensions—1700 mm long, 600 mm wide and 900 mm high—provide ample space for multiple racks to queue without crowding the kitchen aisle. The 900 mm height matches standard dishwasher openings, so racks transfer at the correct level without bending or lifting.

Cleaning is straightforward: the smooth stainless-steel surface wipes down quickly, and the roller tracks can be removed for thorough sanitising. The shelf beneath is open, allowing easy access for wiping and preventing dirt from collecting in corners.

This model is a single configuration with no variants; it is positioned in the catalogue under ‘Dishwashing Workflow' tables.