Novameta table to dishwasher with rolls and shelf 1800 mm BHS-PLOI-180/60/90

A stainless steel worktable designed to bridge the gap between a commercial dishwasher and the kitchen work flow, this Novameta unit provides a continuous surface for loading and unloading racks. The long worktop allows staff to slide racks along its length on integrated rollers, eliminating the need to lift heavy loads between stations. A lower shelf beneath the worktop offers additional storage for clean dishes, detergent or rinse aids, keeping essentials within reach without cluttering the main surface.

The principle is straightforward: the table creates an organised transfer zone directly adjacent to the dishwasher. Dirty racks are placed on the rollers at one end, pushed across the worktop, and loaded into the machine. Clean racks exit the dishwasher onto the same rollers, where they can be left to drain or moved to the lower shelf for storage. This linear movement reduces handling time and minimises the risk of breakage or spills.

In use, the operator positions the table so that its rollers align with the dishwasher's rack guides. Dirty racks are slid onto the worktop, pushed forward, and fed into the machine. Once the cycle completes, clean racks are pulled out onto the rollers, allowed to drain briefly, then either transferred to the lower shelf or moved directly to service areas. The shelf beneath holds stacks of plates, bowls or trays, ready for immediate use.

Constructed from stainless steel, the table resists corrosion and withstands frequent cleaning with commercial detergents. The worktop is a single sheet, seamless where possible, to prevent dirt accumulation. The rollers are mounted on fixed axles, allowing smooth movement without complex mechanisms that could trap debris.

No electronic controls are fitted; the table functions purely as a manual transfer and storage surface. Its dimensions—1800 mm long, 600 mm deep and 900 mm high—provide a substantial work area while fitting into standard kitchen layouts. The length accommodates multiple racks side by side, reducing the need to shuffle items during busy periods. The height matches most commercial dishwashers, ensuring seamless alignment for rack transfer.

The 600 mm depth balances workspace and floor footprint, allowing staff to reach across the table without strain. The 900 mm height is standard for worktop surfaces in professional kitchens, aligning with adjacent counters and sinks. The lower shelf sits at a convenient height for bending and retrieving stored items without excessive reaching.

Cleaning is minimal: the stainless steel surfaces are wiped down with a damp cloth and sanitiser after each shift. The rollers require occasional removal of food debris or detergent residue, which can be done with a brush or cloth without disassembly. The shelf beneath should be cleared and wiped regularly to prevent dust or spills from accumulating.

This model is a single configuration with no variants. It is designed as a standalone unit and does not require additional components for operation. The catalogue places it in the dishwashing and warewashing section, under tables and accessories for commercial dishwashers.