Novameta table to dishwasher with rolls and shelf 2300 mm BHS-PLOI-230/60/90

A stainless-steel worktop mounted on a sturdy frame, designed to link directly to a commercial dishwasher. The smooth surface allows trays, racks and baskets to slide from the wash cycle onto the table without lifting. A set of free-running rolls is built into the worktop, letting staff push heavy loads along the length of the unit with minimal effort. A shelf beneath the worktop holds clean plates, cutlery or glasses at waist height, so they are ready to be reloaded without bending. The table creates a continuous workflow between the dishwasher and the rest of the kitchen. Dirty items are placed on one end, washed, then moved across the rolls to the opposite end where they can be sorted, stacked or transferred to storage. The shelf keeps frequently used items within arm's reach, reducing unnecessary movement and speeding up service. Construction is a welded stainless-steel frame with a brushed finish that resists scratches and corrosion. The worktop is a single sheet of the same material, seamless and easy to wipe clean. The rolls are sealed ball-bearing units that rotate freely under load, and the shelf is a flat stainless-steel panel supported by adjustable brackets. The unit measures 2300 mm in length, 600 mm in width and 900 mm in height. This footprint provides ample space for multiple racks to accumulate while keeping the table at a comfortable working height for most operators. The 2300 mm length allows the table to bridge the gap between a standard dishwasher and a wall or another workstation without crowding the kitchen floor. Cleaning is straightforward: the worktop and shelf are wiped down with a damp cloth and sanitiser after each service. The rolls are cleaned in place with a brush or cloth, and the frame is wiped to remove any splashes or debris. The welded stainless-steel frame stays rigid while the rolls glide plates straight from the pass-through shelf into the dishwasher rack without lifting. The table is supplied as a single unit, ready to be positioned and connected to the dishwasher outlet.