Novameta Table to Dishwasher with Short Rolls and Frame 1200

A stainless steel transfer table bridges the gap between the worktop and the dishwasher, letting trays and racks glide from one station to the next without lifting. The short rolls mounted along the frame carry the weight of loaded trays, so the operator pushes only the friction of the rolls against their bearings. This keeps the workflow continuous and reduces strain on staff during busy service periods.

The table stands at a fixed height that matches most commercial dishwashers and adjacent work surfaces, creating a level run. Trays are placed on the rolls at one end, pushed across the frame, and then lifted or slid directly into the dishwasher rack. The same path works in reverse for clean trays returning to the kitchen.

Construction is a welded stainless steel frame with short nylon or polyurethane rolls spaced evenly across the 1200 mm width. The 600 mm depth gives enough room for standard gastronorm trays to rest fully on the rolls without overhang. The 900 mm height aligns with typical dishwasher entry points, so trays move horizontally without tilting.

No controls are fitted; the table is a passive transfer surface. The footprint of 1200 by 600 mm fits into the standard kitchen module, leaving space for staff to stand and manoeuvre trays on either side.

Cleaning follows from the materials: the stainless steel frame is wiped down with a sanitising cloth, and the rolls are cleaned with a damp cloth to remove food debris. The short rolls can be lifted out of their brackets for deeper cleaning if needed.

The catalogue places this item under ‘Dishwashing Support Equipment' alongside other transfer tables and racking systems.