Novameta table to dishwasher with short rolls and frame 1800 BHS-TPRO-180/60/90

A stainless steel worktop mounted on a sturdy frame with short rollers creates a smooth, level link between a preparation area and a commercial dishwasher. The rollers allow loaded dish racks to glide forward without lifting, reducing strain on kitchen staff and speeding the flow of dirty crockery into the wash cycle. The principle is simple: the table stands at the same height as the dishwasher's entry tray. When a rack is pushed from the worktop onto the rollers, its weight engages the free-spinning wheels, which carry it forward until it meets the dishwasher's conveyor or loading shelf. No power is needed; gravity and the operator's initial push do the work. The short length of the rollers keeps the rack stable and prevents tipping, while the open frame beneath allows easy cleaning and inspection. To use the table, staff load dirty dishes into standard racks at the preparation stations. The racks are then placed on the rear edge of the worktop and pushed gently forward. The rollers take over, guiding the rack straight into the dishwasher. Once the wash cycle is complete, the clean rack is removed from the opposite side, and the process repeats. The table's height and width are chosen to match common commercial dishwashers, ensuring a seamless transfer every time. Construction is entirely in stainless steel, chosen for its resistance to corrosion, heat and frequent washing. The frame is welded for strength, while the worktop is a single sheet with rolled edges to prevent sharp corners. The short rollers are mounted on sealed bearings that require no lubrication and resist water ingress. Controls are absent; the table is a passive transfer device. Its only moving parts are the rollers, which rotate freely whenever a rack is pushed across them. The 1800 mm length provides ample space for multiple racks to queue before entering the dishwasher, reducing bottlenecks during peak service. The 600 mm width matches the standard rack size, so racks sit squarely on the rollers without overhang. The 900 mm height aligns with most commercial dishwasher entry points, eliminating the need for lifting or tilting. The table's footprint is compact enough for tight kitchen layouts yet large enough to handle high volumes of crockery. The stainless-steel frame and sealed short rolls shed water and food debris, letting you wipe the surface dry between dishwasher cycles without disassembly. The stainless steel surfaces can be wiped down with a damp cloth and sanitiser after each shift. The rollers are removable for deeper cleaning, and the open frame allows access to any debris that may collect beneath. No special tools or chemicals are required; routine maintenance keeps the table hygienic and functional. The table is supplied as a single unit, ready for installation. No variants or additional components are listed for this model.