Novameta Table to Dishwasher with Short Rolls and Grid Shelf, 1800 mm

A stainless steel worktop on castors that bridges the gap between a pot-wash area and a commercial dishwasher, letting staff slide racks of crockery and glassware straight from the sink to the machine without lifting. The short rolls built into the surface reduce friction, so a loaded rack moves with a light push and stops where the operator places it. A grid shelf beneath the worktop holds clean racks ready for the next load, keeping the workflow organised and the floor clear.

The principle is simple: instead of carrying racks across the kitchen, the operator slides them along the table. The rolls act as low-friction bearings, so the weight of the rack is supported by the table rather than the operator's arms. This reduces strain and speeds up the cycle between washing and storage. The grid shelf below provides a second level of storage, so clean racks can be staged without taking up additional counter space.

To use the table, the operator loads a rack with washed items from the sink, slides it onto the rolls, and pushes it towards the dishwasher. Once the machine door is open, the rack is guided in. After the wash cycle, the clean rack is pulled out onto the table and transferred to the grid shelf below, ready for unloading. The short rolls ensure the rack moves smoothly in either direction, and the grid shelf keeps the workspace tidy by holding racks off the floor.

The frame and worktop are stainless steel, chosen for hygiene and durability in a wet environment. The short rolls are mounted directly into the worktop, and the grid shelf is fixed beneath at a height that allows standard dish racks to slide in and out without obstruction. The unit stands on castors, so it can be repositioned when the kitchen layout changes or when deep cleaning is required.

The footprint of 1800 mm by 600 mm fits between most commercial dishwashers and pot-wash sinks, making it a standardised link in the wash-up line. The height of 900 mm matches typical worktop levels, so the rolls align with the dishwasher's rack entry point without adjustment. The castors allow the table to be moved for cleaning or reconfiguration, but they do not lock, so the unit should be placed where it will not be accidentally nudged during use.

Cleaning is straightforward: the stainless steel surfaces wipe down with a sanitising cloth, and the rolls can be cleaned in place with a brush to remove food debris. The grid shelf is removable for thorough washing, and the castors should be checked periodically to ensure they roll freely. No specialised tools are required for upkeep, as the construction uses standard fixings and materials designed for frequent contact with water and detergents.

The table is supplied as a single unit with no variants. It is designed to integrate with standard commercial dishwashers and dish racks, so no additional fittings are needed for compatibility.