Novameta table to dishwasher with short rolls and grid shelf BHS-TPSO-110/60/90

A stainless steel worktop with short rollers and a grid shelf bridges the gap between the final rinse station and the dishwasher entry, letting staff slide racks straight into the machine without lifting.

Rollers reduce friction so that loaded racks move with a light push; the grid shelf underneath holds a second rack ready for the next cycle. The table stands at a fixed height that matches the dishwasher's entry roller, eliminating the step that can spill water or tip crockery.

To use, the operator places a loaded rack on the far end of the rollers, slides it forward until it meets the dishwasher's own rollers, then pushes the rack into the machine. The empty rollers are immediately available for the next rack, while the grid shelf below keeps a spare rack within arm's reach.

The frame and worktop are stainless steel throughout, chosen for corrosion resistance and ease of cleaning. Short rollers are mounted in pairs across the width of the table, spaced to support standard dish racks. The grid shelf is fixed at a height that clears the rollers and allows a standard rack to slide underneath.

Overall dimensions of 1100 mm wide, 600 mm deep and 900 mm high create a compact footprint that fits between a rinse tap and the dishwasher without crowding the aisle. The 900 mm height is standardised for most commercial dishwashers, ensuring a level transfer.

Cleaning involves wiping the stainless steel surfaces with a damp cloth and mild detergent after each shift, and periodically removing any debris from the rollers to keep them turning freely. The grid shelf can be lifted out for thorough cleaning if needed.