Novameta table to dishwasher with short rolls and grid shelf BHS-TPSO-150/60/90

A stainless-steel worktop mounted on a sturdy frame, this Novameta table bridges the gap between manual washing-up and the dishwasher. Short rolls embedded in the surface allow racks to glide smoothly from the sink area onto the table, then into the dishwasher without lifting. A grid shelf beneath the worktop holds clean racks ready for the next load, keeping the workflow continuous and the floor clear. The table stands at a standard worktop height, matching the dishwasher and adjacent counters. Its length of 1500 mm provides ample space for two operators to work side by side, loading and unloading racks without crowding. The 600 mm depth ensures that racks sit fully on the table, preventing spills or tipping during transfer. At 900 mm tall, the unit fits under most overhead cupboards and extractor hoods, integrating seamlessly into existing kitchen layouts. Construction is entirely in stainless steel, chosen for its resistance to water, detergents and constant wiping. The frame is welded for rigidity, while the worktop is seamless to eliminate crevices where debris could collect. Short rolls are inset flush with the surface, so they do not snag cloths or utensils. The grid shelf below is open, allowing air to circulate and preventing moisture from pooling. The stainless-steel grid shelf lets water drain straight into the sink while plates and trays air-dry without pooling. The seamless worktop and flush-mounted rolls can be wiped down in a single pass. The grid shelf lifts out for thorough rinsing, and the open frame beneath the table allows mops to reach every corner. No moving parts require lubrication, and the stainless steel will not corrode under normal kitchen conditions.