Novameta table to dishwasher with short rolls and shelf 1700 BHS-TPLO-170/60/90

A worktop with integrated short rolls and a shelf creates a smooth transfer point between dishwashing racks and the dishwasher. Dirty racks roll from the wash-up area onto the table, pause on the shelf for stacking or scraping, then roll directly into the dishwasher without lifting. The same path in reverse collects clean racks ready for unloading.

The principle is continuous flow: rolls reduce friction so staff push racks with one hand while the other steadies the load. A shelf at working height gives a staging area where plates, cutlery and glassware can be sorted, stacked or pre-rinsed before the rack enters the machine. The table stands between the wash-up sink and the dishwasher, eliminating the need to carry racks across the kitchen.

To use the table, staff position a rack on the rolls at one end, slide it along to the shelf, perform any required sorting, then push the rack onto the dishwasher's own rollers. Clean racks follow the same path in reverse, emerging onto the shelf for unloading. The short rolls are fixed in place and do not swivel, guiding racks straight into the machine.

Construction is stainless steel throughout, chosen for hygiene and resistance to water and detergents. The worktop is a single sheet with rolled edges for safety and rigidity. The shelf is mounted below the worktop at a standardised height that matches most commercial dishwashers, ensuring seamless transfer.

The table's footprint of 1700 mm length and 600 mm width fits alongside most under-counter or hood-type dishwashers, while the 900 mm height aligns with standard work surfaces. No controls are fitted; the unit is purely mechanical and requires no power or programming.

Cleaning follows from the materials: wipe the stainless steel surfaces with a damp cloth and a mild detergent after each service, paying attention to the rolls and shelf where food debris may collect. The absence of electrical components simplifies maintenance and reduces the risk of water damage.

The Novameta BHS-TPLO-170/60/90 is a single model with no variants. It is categorised under dishwashing support equipment in the professional catering catalogue.