Novameta table to dishwasher with short rolls and shelf 2200 mm BHS-TPLO-220/60/90

A stainless steel worktable built to link a commercial dishwasher to the washing-up area, the Novameta BHS-TPLO-220/60/90 carries dirty plates on short rollers from the dining side and returns clean ones on the shelf beneath the worktop.

The principle is simple: a rigid frame supports a flat worktop at a fixed height. Short rollers embedded in the top surface let plates and trays slide with minimal effort, so staff can push a stack across the table without lifting. A lower shelf holds clean crockery ready for the next service, keeping it off the worktop and freeing space for soiled items. The table's length matches the width of a standard commercial dishwasher, creating a continuous run from the point where plates leave the dining room to the point where they re-enter it.

To use the table, staff place soiled plates on the roller section at one end. The plates slide across the rollers to the dishwasher loading point. After washing, clean plates are placed on the shelf beneath the worktop, where they remain until needed. The worktop itself can be used for scraping, stacking or temporary storage, while the shelf below keeps clean items organised and within reach.

The frame and worktop are made of stainless steel, chosen for its resistance to water, heat and cleaning chemicals. The short rollers are also stainless steel, mounted in sealed bearings to ensure smooth movement. The shelf is a flat stainless steel panel fixed to the frame at a height that allows standard dish racks to slide underneath.

The table measures 2200 mm in length, 600 mm in depth and 900 mm in height. The 2200 mm length provides ample space for multiple stacks of plates and aligns with the width of most commercial dishwashers. The 600 mm depth allows for comfortable working space on either side of the rollers, while the 900 mm height matches standard worktop heights in professional kitchens, ensuring ergonomic use.

Cleaning is straightforward: the stainless steel surfaces can be wiped down with standard kitchen sanitising solutions. The rollers should be checked periodically to ensure they rotate freely, and any debris caught between them should be removed. The shelf can be cleaned in the same way as the worktop, with no special maintenance required.

The Novameta BHS-TPLO-220/60/90 is categorised as a dishwasher connection table in the Novameta catalogue, designed for use in professional catering environments where efficient plate handling is essential.