Novameta Table to Dishwasher with Sink and Frame 2400 BHS-IIPRO-240/70/90

A continuous worktop links the final rinse of a commercial dishwasher to the sink where pots and plates are scraped and stacked. The frame beneath carries the weight of loaded racks and provides knee space for the operator, while the work surface itself is kept at a standardised height that matches the dishwasher's loading shelf.

The principle is a straight run of stainless steel that eliminates lifting between stations. Dirty items are slid from the sink to the dishwasher rack without leaving the worktop, and clean items return the same way. The sink bowl is positioned so that scrapings fall directly into a waste bin or macerator placed below, while the tap and pre-rinse hose are mounted on the frame for easy reach.

To use the unit, the operator first scrapes and stacks items in the sink. A pre-rinse with the hose removes loose debris, then the rack is filled and pushed along the worktop into the dishwasher. After the cycle, the rack is pulled back onto the table, where clean items can cool and drain before being put away. The continuous surface also allows temporary storage of clean racks while the next load is prepared.

Construction is a welded stainless-steel frame with adjustable feet for levelling on uneven floors. The worktop and sink are formed from a single sheet of stainless steel, eliminating seams where food debris could collect. The frame's open design allows access for cleaning beneath the unit and for positioning waste bins or macerators.

The 2400 mm length provides enough space for two operators to work side by side during peak service, with the sink positioned centrally for shared access. The 700 mm depth ensures compatibility with standard dishwasher racks and waste bins, while the 900 mm height matches the loading shelf of most under-counter and pass-through dishwashers.

Cleaning is straightforward: the stainless-steel surface is wiped down with a sanitising solution, and the sink is scrubbed to remove food debris. The open frame allows hosing down of the area beneath the table, and the adjustable feet prevent water pooling by ensuring the unit is level.

This model is a single variant with no additional configurations or options.

The product is listed in the catalogue under ‘Dishwashing Stations' alongside other worktop-integrated solutions for professional kitchens.