Choose category
Choose category
Your Cart

Novameta table to dishwasher with sink and shelf 600 mm

Novameta table to dishwasher with sink and shelf 600 mm
Product images are illustrative
Product images are illustrative. The videos in the product description are for informational purposes only, so the information contained in them may differ from the product itself.

Technical data

Attributes
ARTICLE BHS-IPLO-60/70/90
SIZE L/W/H 600 / 700 / 900
Novameta table to dishwasher with sink and shelf 600 mm
  • : Novameta
  • Article number: BHS-IPLO-60/70/90
Is available
493.00€
with VAT: 596.53€

A stainless-steel worktop with an integrated sink and a lower shelf organises the final rinse and staging area directly beside the dishwasher. The work surface holds soiled plates, cutlery and glassware while the sink provides a tap for pre-rinse or soaking; the shelf below keeps clean racks or detergent within arm's reach.

The unit stands as a rigid frame of square-section tubing clad in sheet stainless steel. The top is a single flat plane with rolled edges to contain spills; the sink is pressed into the right-hand side, leaving the rest of the surface clear for stacking. A shelf of perforated stainless steel spans the width beneath the worktop, supported by the same tubular frame that carries the legs. Adjustable feet at each corner level the table on uneven floors.

The operator loads soiled items onto the worktop, uses the sink for pre-rinse or soaking, then slides the racks onto the shelf below ready for the dishwasher. Clean racks or detergent bottles can be stored on the same shelf between cycles.

Construction is fully welded stainless steel throughout, with a brushed finish that resists fingerprints and water marks. The sink is a single pressed bowl without drainer; the shelf is perforated to allow air circulation and drainage. Four adjustable feet are fitted, each capable of levelling the table on a sloping floor.

The overall footprint of 600 mm width and 700 mm depth fits between standard dishwasher widths and wall-mounted cupboards, while the 900 mm height aligns with adjacent worktops for a continuous work surface. The 600 mm width matches the most common under-counter dishwasher cavity, placing the sink and shelf within easy reach of the operator standing at the machine.

Cleaning follows the same routine as any stainless-steel worktop: daily wipe-down with a mild detergent, periodic scrub with a non-abrasive pad to remove water marks, and occasional sanitising. The perforated shelf allows water and debris to fall through, so it can be rinsed or wiped without removing items stored on it.

The catalogue places this unit in the dishwashing section, under staging and pre-rinse tables.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
Bad           Good

Delivery and warranty

Free Shipping
Free delivery throughout Latvia over 200€ up to 30 kg. Does not apply to promotional items. Learn more.
Best Typography Options
12-month warranty for professional equipment, 24 months for “home” products. Learn more.
Professional Maintenance and Repair
A wide range of HoReCa spare parts and knowledgeable craftsmen. Learn more.

Large purchase volume or don't know where to start?