Novameta table to dishwasher without shelf 1000 mm BHS-PRO-100/70/90

A stainless steel worktop designed to connect directly to a commercial dishwasher, providing a seamless transition from soiled dishes to cleaning. The unit stands as a dedicated staging area where staff can scrape, stack and slide racks straight into the machine without lifting or carrying.

The principle is simple: a flat, rigid surface at the correct height eliminates the gap between the work flow and the dishwasher's entry. This reduces handling, speeds the cycle and keeps the floor clear of drips and spills. The table's height is standardised to match most under-counter and hood-type dishwashers, so the operator can push racks across without tilting or jamming.

Use begins by clearing the worktop of any items not related to dishwashing. Soiled dishes are scraped, stacked on the table and loaded into racks. The racks are then slid across the smooth surface and into the dishwasher's entry roller or conveyor. Once the wash cycle is complete, clean racks exit onto the opposite side of the machine, where they can be left to drain or transferred to storage.

Construction is a single sheet of stainless steel folded into a box section with welded seams. The underside is open, allowing the dishwasher to be positioned flush against the table's rear edge. No shelf is fitted, so the entire surface remains clear for loading and unloading.

The table's dimensions—1000 mm wide, 700 mm deep and 900 mm high—set its role in the kitchen. The 1000 mm width accommodates standard dish racks side by side, while the 700 mm depth provides enough space for stacking without overhang. The 900 mm height aligns with most commercial dishwashers, ensuring a level transfer. The footprint requires a dedicated area next to the dishwasher, so the layout must allow for a clear run from the soiled side to the clean side.

Cleaning is straightforward: the stainless steel surface is wiped down with a damp cloth and sanitiser after each service. The open underside allows access for mopping beneath the unit, preventing debris from accumulating. No moving parts or electrical components are present, so maintenance is limited to keeping the surface free of scratches and corrosion.

The catalogue places this model in the dishwashing section under ‘tables and stands', where it is grouped with other stainless steel worktops designed for direct dishwasher connection.