Novameta table to dishwasher without shelf 2100 mm BHS-PRO-210/70/90

A stainless steel worktop designed to sit directly between a commercial dishwasher and the kitchen work flow, removing the need for a separate shelf unit. The continuous surface creates a single organised space where clean plates, cutlery and glassware emerge from the machine and are immediately accessible for sorting, stacking or service.

The principle is simple: the table extends the dishwasher's own output area, eliminating the step of transferring items to a separate bench. This reduces handling, speeds up turnaround and keeps the dishwashing station compact. Because the table has no shelf beneath, the full depth is clear for staff to stand or for mobile racks to be wheeled in and out without obstruction.

Use follows the dishwasher's cycle. Once the machine signals the end of a wash, the operator opens the door and slides the rack onto the table. Items are left to drain briefly, then sorted directly onto the worktop or into storage trays. The absence of a shelf means there is no barrier between the dishwasher and the table, so racks can be pulled straight across without lifting. The same clear space allows staff to reach the back of the table easily, keeping the entire surface within arm's length.

Construction is a single stainless steel top mounted on a tubular frame. The frame is adjustable for levelling on uneven floors, ensuring the table remains stable and aligned with the dishwasher. The worktop is seamless, with no joints or crevices that could trap debris, and the underside is open, allowing air to circulate and preventing moisture build-up.

Controls are limited to the levelling feet, which are set once during installation. No electrical or plumbing connections are required, so the table can be positioned anywhere a dishwasher fits.

The 2100 mm length provides enough linear space for two standard dishwasher racks side by side, or for a single rack with additional room for sorting. The 700 mm depth matches the footprint of most under-counter and pass-through dishwashers, creating a flush run that does not protrude into the kitchen aisle. The 900 mm height aligns with standard worktop levels, so the surface is ergonomic for standing staff and compatible with adjacent counters and trolleys.

Cleaning is straightforward: the stainless steel top is wiped down with a damp cloth and sanitiser after each service period. The open frame allows easy access for mopping beneath, and the absence of a shelf removes a common dust trap. The levelling feet should be checked periodically to maintain stability.

The table is supplied without a shelf, as specified. No variants or additional components are listed for this article.