Novameta table top for bar station 500-6

A stainless-steel work surface built to hold bar equipment, glassware and service items without flexing or corrosion.

The table top is a rigid platform that carries the static and dynamic loads of a working bar. It spreads the weight across its full area, transferring it to the supporting frame or cupboard below. The flat, seamless surface prevents spills from pooling or seeping into joints, so liquids and cleaning agents stay on top where they can be wiped away.

To use the top, position it on a level base of matching dimensions. Secure it with the fasteners provided or with the clamps of the under-counter unit. Place bar equipment directly on the surface; no additional matting or insulation is required. The top remains in place during service, supporting bottles, taps, ice bins and glass racks without sagging or warping.

The construction is a single sheet of AISI 304 stainless steel, 40 mm high. The edges are folded down to form a continuous rim that stiffens the panel and protects the underside from knocks. No welds or seams are visible on the work surface, so there are no crevices where dirt or bacteria can collect.

The 500 mm depth and 600 mm width create a compact footprint that fits between standard under-bar cupboards or on a counter-height frame. The 40 mm height adds rigidity without raising the working level above the reach of most operators. The weight of the steel ensures the top stays in place during use, while remaining light enough to lift for cleaning or repositioning.

Cleaning is done with a damp cloth and a mild detergent. The stainless steel resists staining from spirits, syrups and fruit juices, and does not absorb odours. After wiping, the surface dries quickly and can be polished with a dry microfibre cloth to restore the original finish.

The table top is supplied as a single unit, with no variants or accessories.